• 中德合资河北曼吉科工艺玻璃钢有限公司
  • 中德合资河北曼吉科工艺玻璃钢有限公司
  • 中德合资河北曼吉科工艺玻璃钢有限公司
  • 中德合资河北曼吉科工艺玻璃钢有限公司
电    话:0318-8238318
手    机:15132861331
联系人:丁经理
邮    箱:1211163242@qq.com
网    址:www.huafenchifrp.com
地    址:河北省枣强县富强北路258号
产品展示
玻璃钢模压水箱
所属分类:玻璃钢水箱
发布日期:2014-12-14
浏览:
咨询电话:15132861331
分享此产品:
玻璃钢模压水箱

玻璃钢模压水箱让您的生活更舒适,玻璃钢模压水箱选用优质树脂为制作原料,加上优良的模压生产工艺制作而成,具有重量轻、无锈蚀、不渗漏、水质好、使用范围广、使用寿命长、保温性能好,外形美观、安装方便、清洗维修简便、适应性强等特点,广泛应用于宾馆饭店、学校、医院、工矿企业、事业单位、居民住宅、办公大楼,是作为公共生活用水、消防和工业用水贮水设施的理想产品。

模压玻璃钢水箱,它是块四周带翻边的正方形凹面板,翻边的垂直面通过一个过渡斜面与上部的平面连接,上部平面的中间设置一个下凹的半球形凹面,半球形凹面的边部与过渡斜面的上边相接,半球形凹面的底部与翻边垂直面的底边齐平,翻边垂直面的内侧、平面的反面和半球形凹面的反面所呈现的半球形凸面连接有加强筋,位于拐角处的加强筋为长加强筋,长加强筋之间分别设置两根短筋,长、短加强筋呈放射状与半球形凹面的反面所呈现的半球形凸面边缘连接。本实用新型的模压玻璃钢水箱板和现有技术相比,具有结构简单、机械强度高、结构设计合理,外形美观等特点,将具有很好的推广使用价值。



Pore Clean-out Cover Orifice Board Outside Staircase Overfall Gap Drain Opening Water Outlet Concrete Foundation Steel Frame Drain Opening Drain Board Bottom Board Outer board Side Board Angle Steel Roof

SMC Combined Water Tank Structure Section

Tank construction
SMC combined water tank is assembled by the SMC molded board, sealing materials, metal structure and

piping system, it is possible to assemble 1-1000 cubic meters of water tank according to the users’ needs, if the original water tank needs to be updated, don’t need transforming the housing, move the molded veneer into the room through the door, and then assemble them, good in adaptability, thus brings a great convenience for the design and construction, general water tanks are designed according to the standard, special and large water tanks need special design.
The tank seal is adopted the approved product specially developed – sealing tape, this kind of sealing tape is non-toxic, water-resistant, big in elasticity, small in permanent deformation, whose period of use is more than 30 years.

Tank Specifications and Dimensions Table (for reference)

x Length xWidth (m)

容积 Volume


高度 Heightm

SMC FRP Molded Board Combination Tank

Brief Introduction to SMC Combined Water Tanks

Developed by he National Building Materials Bureau FRP Research Institute and designed by Beijing Architecture Design Institute, SMC combined water tanks are new tanks currently widely used in the world, their unique properties have solved the problems of concrete water tanks being large in weight, easy to be leaked, easy to grow moss and steel tanks being easily corroded and that the antirust coating falling off easily polluted to the water and etc.. This kind of tank has the advantages of being good in water quality, no penetration, light in weight, beautiful in appearance, long in life and easy to install. The water tank is the national "7th Five-year Program" key scientific and technological project, it has been listed in the national key promoted new product project during "Eighth Five-Year Program" period.

Clean Performance

The Environmental Hygiene and Sanitation Engineering Research Institute of Chinese Academy of Preventive Medicine and Beijing Municipal Health and Epidemic Prevention Station have conducted the chemical and toxicological experiment, evaluated as follows:
In the synthetic materials provided, we haven’t found toxic and disabling compound, seen from
GC-MS identification and volatile test results, the soaking liquid of SMC water tank is not found compounds that high in content and big in toxicity; Toxicity Test: experiment on the water soaked animal of SMC water tank indicated no acute toxicity and accumulative toxicity, the quality of tank body soaked water met the National Drinking Water Standards (GB5749-85) and the Japanese Water Head Tank Water Quality Standards.

SMC FRP Molded Board Combination Tank

SMC Tank Molded Veneer

SMC Molded Veneer Performance

Tensile strength

Bending Strength

Flexural Modulus

Pap Hardness

Water Absorption

Glass Fiber Content

Specifications and Performance

Specifications of SMC Tank Molded Veneer (If necessary, other specifications can be negotiated)

1000x1000mm, 1000x500mm,500x500mm;

Thickness: 5mm, 8mm, 10mm, 12mm, 14mm and 16mm; among which 5mm-thick veneer is specially used for making tank cover.

SMC molded tank implements the National Building Materials Industry Standar (JC658.1-1997)


 

上一个产品:玻璃钢除尘器
下一个产品:玻璃钢地埋式一体化污水处理设备
版权所有:中德合资河北曼吉科工艺玻璃钢有限公司
电话:0318-8238318   手机:15132861331    地址:河北省枣强县富强北路258号  冀ICP备12016337号-1
友情链接:中国玻璃钢网 | 中国复合材料信息网 | 复材在线 | 百度 | 阿里巴巴 | 慧聪网 | 中国管道商务网 | 橡胶接头 | 中国化工设备网 | 环球经贸网 | 液压接头 | 锁管机 | 液压旋转接头 | 玻璃钢酸雾净化塔 | 河北升降机 | 金属波纹管设备 | 外贴式橡胶止水带 | 双组份聚硫密封胶 | 冷却塔填料 | 玻璃钢格栅 | 大口径胶管 | 尼龙网 | 网片 | 背贴式橡胶止水带 | 遇水膨胀止水条 | 清污机 | 橡胶止水带 | 聚氨酯密封胶 | 聚硫密封胶 | 聚乙烯闭孔泡沫板 | 成都橡胶止水带 | 缓冲气柱袋 | 玻璃钢管道 | 玻璃钢标志桩 | 地质灾害评估 | 橡胶护舷 | 大口径波纹管 | 钢构支座 | 护理床 | 钢板腻子止水带 | 钢板腻子止水带 | 玻璃钢风机 | 玻璃钢标志桩 | 玻璃钢化粪池 | 玻璃钢电缆桥架 | 玻璃钢水箱 | 双组份聚硫密封胶 | 双组份聚硫密封胶 | 缓冲气柱袋 | 楼顶装饰塔 | 玻璃钢净化塔 | 金库门 | 枪柜 | 制罐 | 脚轮