• 中德合资河北曼吉科工艺玻璃钢有限公司
  • 中德合资河北曼吉科工艺玻璃钢有限公司
  • 中德合资河北曼吉科工艺玻璃钢有限公司
  • 中德合资河北曼吉科工艺玻璃钢有限公司
电    话:0318-8238318
手    机:15132861331
联系人:丁经理
邮    箱:1211163242@qq.com
网    址:www.huafenchifrp.com
地    址:河北省枣强县富强北路258号
产品展示
玻璃钢模压水箱
所属分类:玻璃钢水箱
发布日期:2012-9-11
浏览:
咨询电话:15132861331
分享此产品:
玻璃钢模压水箱

玻璃钢模压水箱

    模压工艺具有较高的生产效率,制品尺寸精确,表面光洁,由于模压成型工艺具有上述优点,已成为复合材料的重要成型方法,根据模压料的特性和成型工艺过程可分为SMC(片状模塑料)和BMC(团状模塑料), BMC用于制造小型制品,如玻璃钢井盖、盖板和法兰连接件等市政、建筑定型产品,SMC则用于生产大型薄壁制品,如玻璃钢冷却塔、天线罩。近年来由于SMC、BMC和新型模塑料的出现以及它们在汽车工业上的广泛应用,实现了专业化、自动化和高效率生产。制品成本不断降低,其使用范围越来越广泛。模压制品主要用作结构件、连接件、防护件和电气绝缘件。广泛应用于工业、农业、交通运输、电气、化工、建筑、机械等领域。由于模压制品质量可靠,在兵器、飞机、导弹和卫星上也都得到应用。
    玻璃钢模压井盖、水箅采用不饱和树脂等化工原料,辅以钢筋加强,经高温、高压模压而成。该产品融新技术、新工艺、新配方为一体是目前铸铁、水泥井盖最为理想的代替品。该产品经权威部门检测,其各项性能指标均超过同类的其它产品,可大量用市政工程。

Pore    Clean-out Cover   Orifice Board   Outside Staircase   Overfall Gap    Drain Opening    Water Outlet   Concrete Foundation    Steel Frame    Drain Opening    Drain Board    Bottom Board    Outer board  Side Board   Angle Steel   Roof     

 

SMC Combined Water Tank Structure Section

 

Tank construction
SMC combined water tank is assembled by the SMC molded board, sealing materials, metal structure and

piping system, it is possible to assemble 1-1000 cubic meters of water tank according to the users’ needs, if the original water tank needs to be updated, don’t need transforming the housing, move the molded veneer into the room through the door, and then assemble them, good in adaptability, thus brings a great convenience for the design and construction, general water tanks are designed according to the standard, special and large water tanks need special design.
  The tank seal is adopted the approved product specially developed – sealing tape, this kind of sealing tape is non-toxic, water-resistant, big in elasticity, small in permanent deformation, whose period of use is more than 30 years.

Tank Specifications and Dimensions Table (for reference)

 

    x Length xWidth (m)

容积 Volume


高度 Heightm

 

SMC FRP Molded Board Combination Tank

 

 

  Brief Introduction to SMC Combined Water Tanks

Developed by he National Building Materials Bureau FRP Research Institute and designed by Beijing Architecture Design Institute, SMC combined water tanks are new tanks currently widely used in the world, their unique properties have solved the problems of concrete water tanks being large in weight, easy to be leaked, easy to grow moss and steel tanks being easily corroded and that the antirust coating falling off easily polluted to the water and etc.. This kind of tank has the advantages of being good in water quality, no penetration, light in weight, beautiful in appearance, long in life and easy to install. The water tank is the national "7th Five-year Program" key scientific and technological project, it has been listed in the national key promoted new product project during "Eighth Five-Year Program" period.

 

Clean Performance

The Environmental Hygiene and Sanitation Engineering Research Institute of Chinese Academy of Preventive Medicine and Beijing Municipal Health and Epidemic Prevention Station have conducted the chemical and toxicological experiment, evaluated as follows:
  In the synthetic materials provided, we haven’t found toxic and disabling compound, seen from
GC-MS identification and volatile test results, the soaking liquid of SMC water tank is not found compounds that high in content and big in toxicity; Toxicity Test: experiment on the water soaked animal of SMC water tank indicated no acute toxicity and accumulative toxicity, the quality of tank body soaked water met the National Drinking Water Standards (GB5749-85) and the Japanese Water Head Tank Water Quality Standards.

 

SMC FRP Molded Board Combination Tank

                       SMC Tank Molded Veneer

 

SMC Molded Veneer Performance

Tensile strength

Bending Strength

Flexural Modulus

Pap Hardness

Water Absorption

Glass Fiber Content

Specifications and Performance

  Specifications of SMC Tank Molded Veneer (If necessary, other specifications can be negotiated)

1000x1000mm, 1000x500mm,500x500mm;

Thickness: 5mm, 8mm, 10mm, 12mm, 14mm and 16mm; among which 5mm-thick veneer is specially used for making tank cover.

SMC molded tank implements the National Building Materials Industry Standar (JC658.1-1997)


上一个产品:玻璃钢模压井盖
下一个产品:BT35-11型玻璃钢轴流通风机
版权所有:中德合资河北曼吉科工艺玻璃钢有限公司
电话:0318-8238318   手机:15132861331    地址:河北省枣强县富强北路258号  冀ICP备12016337号-1
友情链接:中国玻璃钢网 | 中国复合材料信息网 | 复材在线 | 百度 | 阿里巴巴 | 慧聪网 | 中国管道商务网 | 橡胶接头 | 中国化工设备网 | 环球经贸网 | 液压接头 | 锁管机 | 液压旋转接头 | 玻璃钢酸雾净化塔 | 河北升降机 | 金属波纹管设备 | 外贴式橡胶止水带 | 双组份聚硫密封胶 | 冷却塔填料 | 玻璃钢格栅 | 大口径胶管 | 尼龙网 | 网片 | 背贴式橡胶止水带 | 遇水膨胀止水条 | 清污机 | 橡胶止水带 | 聚氨酯密封胶 | 聚硫密封胶 | 聚乙烯闭孔泡沫板 | 成都橡胶止水带 | 缓冲气柱袋 | 玻璃钢管道 | 玻璃钢标志桩 | 地质灾害评估 | 橡胶护舷 | 大口径波纹管 | 钢构支座 | 护理床 | 钢板腻子止水带 | 钢板腻子止水带 | 玻璃钢风机 | 玻璃钢标志桩 | 玻璃钢化粪池 | 玻璃钢电缆桥架 | 玻璃钢水箱 | 双组份聚硫密封胶 | 双组份聚硫密封胶 | 缓冲气柱袋 | 楼顶装饰塔 | 玻璃钢净化塔 | 金库门 | 枪柜 | 制罐 | 脚轮